Product Details

Technical Specifications:

Varistor Measurement

Discharge Tube Measurement

Insulation Resistance: 6MΩ (500V)

Withstand Voltage:    AC  1.5kV  50HZ  1min

Operating Temperature and Humidity: 0～＋40℃   ≤85％RH

Storage Temperature and Humidity: －10℃～＋50℃   ≤90％RH

Power Supply: AC  220V   50Hz

DC  12V        0.5A    (Core wire + pole)

Power Consumption: 8W

Dimensions: 208mm×190mm×78mm

Weight: ≤1kg

Operation Panel:

1. Test Socket +            2. Test Socket -        3. Range Adjustment   

4. LCD Display          5. Voltage Preset         6. Single/Continuous Switch  

7. Function Selection Switch        8. High Voltage Indicator       9. High Voltage Start Key     

10. Display Conversion Key          11. Test Key          12. Discharge Indicator

13. Fuse Holder           14. Power Switch       15. Power Socket

16. External DC 12V Power Jack (Core wire is +)

   Precautions and Instructions:

1. This device is equipped with a range (test range) adjustment function. In use, you can reduce the test voltage as much as possible to reduce energy consumption, extend instrument life, and reduce safety hazards. It also reduces test time and improves efficiency. It can also be used for group screening, inspection, and discrimination. Users can fully and reasonably utilize this function.

Preset Voltage Adjustment Range:     0V ～ 1800V

Range Voltage Adjustment Range:    100V ～ 1999V

If the range setting or test value exceeds 1999V, the display shows overflow signal “1”.

2. The preset voltage value for discharge tube testing is the starting value of the 100V/S rate rising voltage, and also the lower limit of the test range. The preset voltage for varistor testing is only used as the lower limit for judgment; the actual lower limit of the test range always starts from 0V.

3. The preset voltage setting should be lower than the upper limit voltage of the range. Otherwise, the test voltage will be under the range (upper limit) limit control state. In varistor testing, each test completion will have an over-range audible alarm buzzer sound; in discharge tube testing, the green light will be repeatedly lit, accompanied by an over-range audible alarm. At this time, lowering the preset voltage will place the high voltage in the preset state.

4. The test voltage of this device can be as high as 2kV. Keep the panel, test leads, and work surface clean and dry to avoid test errors caused by leakage current, arc, or corona.

5. A two-phase three-wire power socket must be used, and the ground wire should be properly grounded.

6. Operators should take necessary high-voltage protection measures to prevent electric shock injury.

Performance Features:

Vacuum Arrester and Lightning Protector Tester Discharge Tube Measuring Instrument, suitable for measuring DC parameters of overvoltage protection components such as zinc oxide arresters (varistors), metal ceramic two- and three-electrode discharge tubes, and vacuum arresters. It can also be used as a stabilized voltage and constant current power supply for other applications.

Vacuum Arrester and Lightning Protector Tester Discharge Tube Measuring Instrument, with high-voltage short-circuit protection, overcurrent protection, high-voltage preset, range adjustment and other functions. High-voltage self-discharge time is less than 0.5 seconds.

Has self-check function.

Measurement data is displayed by 3 1/2 LCD digital display, with high accuracy and good reliability.

During measurement, the range can be preset, and an audible alarm is issued for over-range tests during the measurement process, suitable for component grouping and inspection discrimination.

Selecting continuous measurement allows uninterrupted testing of batch samples.

Vacuum Arrester and Lightning Protector Tester Discharge Tube Measuring Instrument, with simple panel functions and easy operation.

Lightweight and easy to carry.

Note: The above information and technical parameters are compiled and published by Yangzhou Dary Electric Co., Ltd.