2. Input current: 0.2A;
3. Printing gauge length: 5mm 10mm;
4. Overall dimensions: 630×230×300mm;
5. Weight: approximately 30 kg.
Electric steel bar gauge marking machine
Manual steel bar gauge marking machine
Continuous steel bar gauge marking machine
Aliases: Steel bar printer | Steel bar marking machine | Multi-point steel bar gauge marking machine | Electric gauge marking machine | Manual gauge marking machine
1. First determine the gauge length. To adjust the gauge length, loosen the fixing screws on both sides of the printing assembly by 5 mm, then tighten the screws.
2. Lift the cone rod lifting handle, straighten the steel bar, place it into the V-shaped groove (with the straight edge of the deformed bar facing upward), and tighten it securely.
3. Lower the handle and rotate the small wheel on the left end so that the cone rod is at its lowest position. Adjust the height adjustment handle so that the cone tip contacts the steel bar, then continue to lower it by 1-2 mm to ensure sufficient penetration allowance for the cone head.
4. Lift the handle, connect the power supply, switch the direction switch to the left position, and turn on the power switch. The power indicator light will illuminate. If the printing assembly is in the middle position, the work indicator light will also illuminate, and the printing assembly will travel to the far left and stop automatically, and the work indicator light will turn off.
5. ... (Note: The original text is cut off, so the translation is incomplete. Please provide the rest of the content for full translation.)
